4' Type 1 Commercial Kitchen Wall Canopy Hood and Fan System


This system is a very basic package. Unless you are a professional installer, we strongly recommend you take 2 mins to answer a few questions so we can create a system to meet your exact needs. There is no obligation or annoying sales pitch. We’ll send you a price quote, with all the specifications and drawings in 24 hours or less. Changes can be made after you review with your installers/inspectors. Just click the orange box above where it says “Need Help Finding the Right Hood or Fan”.



Item Number:
04-WCFSFS
Weight:
467 lbs
Usually Ships in 4-6 Weeks
Free Shipping

4' Type 1 Commercial Kitchen Wall Canopy Hood and Fan System

  • 4' Type 1 Commercial Kitchen Wall Canopy Hood and Fan System
  • 4' Type 1 Commercial Kitchen Wall Canopy Hood and Fan System
  • 4' Type 1 Commercial Kitchen Wall Canopy Hood and Fan System
  • 4' Type 1 Commercial Kitchen Wall Canopy Hood and Fan System
  • 4' Type 1 Commercial Kitchen Wall Canopy Hood and Fan System
  • 4' Type 1 Commercial Kitchen Wall Canopy Hood and Fan System

4' Type 1 Commercial Kitchen Wall Canopy Hood and Fan System

The 4' Commercial Kitchen Wall Canopy Hood and Fan System features a 4' long exhaust-only wall canopy hood with a front perforated supply plenum, a built-in 3" back standoff, and a 48" depth that improves the capture and containment of grease vapors at lower airflow volumes.ETL and NSF listed.

Exposed surfaces of the hood are constructed of 430 Stainless Steel and it is rated to 600 degrees allowing the hood to be used with both medium and heavy duty cooking equipment.

Note: This system is a very basic package. Unless you are a professional installer, we strongly recommend you take 2 mins to answer a few questions so we can create a system to meet your exact needs. There is no obligation or annoying sales pitch. We’ll send you a price quote, with all the specifications and drawings in 24 hours or less. Changes can be made after you review with your installers/inspectors. Just click the orange box above where it says “Need Help Finding the Right Hood or Fan”.

The 4' Hood System includes:

  • 430 SS Where Exposed

  • 48" depth provides better capture and containment of cooking vapors at lower airflow volumes.

  • 600 degree hood rating - allows use with medium to heavy duty cooking equipment providing ultimate flexibility.

  • FILTER - 16" tall x 20" wide Kleen-Gard Stainless Steel Baffle Filter with Handles and Bottom Hanging Hook, UL Classified

  • Incandescent Light Fixture-High Temp Assembly, Includes Clear Thermal and Shock Resistant Globe (L55 Fixture), Bulbs By Others

  • EXHAUST RISER - Factory installed 10" Diameter x 4" Height

  • SUPPLY RISER - 12"x 28" Supply Riser with Volume Dampers

  • 1/2 Pint Grease Cup New Style, Flanged Slotted
     

Optional Hood Items: These will be included if you click "Need Help Finding the Right Hood" above. 

  • Fire Suppression System – Required by law for all hoods. These can be purchased and installed by a local licensed company if not ordered with your hood.
  • Utility Cabinet - Cabinet can house pre-wired electrical controls and fire suppression system. Right or left mounted.
  • Electrical Prewired Package – LCD interface for easy adjustment and use of lights and fan. Thermostatically controlled with room temperature sensor. Demand Control (DCV) options available.

If any other add-ons or customizations are need please contact us. We work directly with the manufacture to configure everything to your exact specifications.


High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control (single phase only), disconnect switch and 11-3/4" wheel.

  • Exhaust Fan handles 900 CFM @ -0.500" wc ESP, Fan runs at 1466 RPM

  • Exhaust Motor: 0.333 HP, 1 Phase 115 V, 60Hz, 5.6 FLA, ODP (Open Drip Proof)

  • Grease Cup for kitchen-duty centrifugal exhaust fans, Box Dimensions 15-3/4 L X 5-1/16 W X 3-3/4 H (18 GA.) (Includes Down Spout)

  • Curb CRB19.5X22E On Fan # 1 Flat Curb

  • Hinged Base for Curb. Standard Hinge attached to curb. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized

  • Vented Base for Curb
     

Untempered Supply Unit with 10" Blower in Size #1 Housing - Tempered Units Available. Please contact us for pricing and specifications.

  • Supply Fan handles 720 CFM @ 0.250" wc ESP, Fan runs at 489 RPM 

  • Supply Motor: 0.333 HP, 1 Phase 115 V, 60Hz, 7.0 FLA, ODP (Open Drip Proof)

  • Down Discharge - Air Flow Right -> Left (Side discharge available)
  • Sloped Filtered Intake for Size #1 Standard Untempered Supply Unit. 22" Wide x 25.875" Long x 23.375" High. Includes 2" MV EZ Kleen Metal Mesh Filters.

  • Curb CRB21X20 On Fan # 2 Flat Curb
     

An upgrade to the Captrate Solo Filter is available. Contact us for details.


Free Ground Shipping to Contiguous United States. Canada, Hawaii, and Alaska Excluded


Return Policy: No returns or exchanges accepted. All sales final. Refused deliveries will not be refunded. Please confirm all details before ordering.


Related Articles and Resources

How to Protect Your Business From Hidden Fire Hazards in Your Hood and Duct System

How to Keep Your Hood System Fire Code Compliant

What You Should Know Before Buying a Kitchen Exhaust System

Save Thousands with Proper Kitchen Exhaust Hood Maintenance

The Complete Guide to Upblast Exhaust Fans (PDF)