10" X 20" X 2" HD Stainless Steel Hood Filter

10" X 20" Stainless Steel Baffle Grease Filters are the easiest to maintain, will last the longest and have the best appearance. This hood filter is perfect for tough commercial kitchen applications and provides maximum permanent protection against rust and corrosion.

• Unique locking seam design makes these filters the most durable filters on the market 

• Will not flex or twist like other filters even after repeated dropping

• Safe, dependable, positive flame barrier protection

• Seamless, smooth surfaces permit constant grease run-off into hood collection troughs... easily cleaned by soaking, spraying or conventional dishwashers. 

• Handles are included

• UL Listed and Classified by Underwriters Laboratory Inc as to flammability after exposure to grease-laden air only.

 

This 2” thick grease filter contains two layers of equally spaced roll formed baffles. The spacing creates an air flow that allows grease to collect, then drain down the baffles and finally into the collecting trough.

 

HOOD FILTER INSTALLATION

 

Hood grease filters must be installed at an angle of 45 degrees or greater so the grease will drain to the bottom. You also need a grease cup beneath the lower edge of the filters for the grease to drip into.

 

When reinstalling a hood filter, make sure that the grease hole in the filter is at the bottom. Hood baffle filters should always be installed with the baffles running vertically for optimal grease collection.