10" X 20" X 2' HD Galvanized Hood Filter

12" X 16" Galvanized Baffle Grease Filters provide rugged performance, superb corrosion resistance and absolute low cost. If you are looking for the least expensive hood filter, this would be your choice.  

• Unique locking seam design makes these filters the most durable filters on the market 

• Will not flex or twist like other filters even after repeated dropping

• Safe, dependable, positive flame barrier protection

• Seamless, smooth surfaces permit constant grease run-off into hood collection troughs... easily cleaned by soaking, spraying or conventional dishwashers. 

• Handles are included

• UL Listed and Classified by Underwriters Laboratory Inc as to flammability after exposure to grease-laden air.

 

This 2” thick grease filter contains two layers of equally spaced roll formed baffles. The spacing creates an air flow that allows grease to collect, then drain down the baffles and finally into the collecting trough.

 

HOOD FILTER INSTALLATION

 

Hood grease filters must be installed at an angle of 45 degrees or greater so the grease will drain to the bottom. You also need a grease cup beneath the lower edge of the filters for the grease to drip into.

 

When reinstalling a hood filter, make sure that the grease hole in the filter is at the bottom. Hood baffle filters should always be installed with the baffles running vertically for optimal grease collection.